RD BRAKE FLUID DOT 3 750ML

TYPICAL VALUES              RD DOT 3

Density at 20℃                  1030 g/cm3

Viscosity at -40℃              <1300 mm2/s

Dry boiling point (min.)      >205

Wet boiling point (min.)     >140

The above values may vary within commercially accepted tolerances.
*Meets the requirements of the OEM manufacturer.

APPLICATIONS:  is a high quality medium specially developed for hydraulic braking systems of cars, trucks, mopeds, scooters, forklifts, motorcycles, etc. in both drum and disc brakes (with and without ABS/ASR).

The RD Brake DOT 3 is a synthetic brake fluid having the following properties:

A GOOD RESISTANCE AGAINST AGEING

A VERY GOOD COMPATIBILITY WITH SEALS & GASKETS

MINIMAL CORROSION TENDENCY

OPTIMAL VISCOSITY AT LOW TEMPERATURES

Applicable for all hydraulic brake systems with drum or disk brakes requiring a synthetic brake fluid type and where a brake fluid of the type DOT 3 is prescribed.

PERFORMANCE LEVEL
FMVSS 116 DOT 3, SAE J1703, ISO 4925 
By product choice always follow the requirements and instructions of the manufacturer.